The Biggest Marine Webstore Around The Baltic Sea
Cart is empty
Menu Categories
Search:
Sulge

Contact

Contact

Varnishes, Thinners

CUSTOMERS WHO ORDER OUTSIDE EU COUNTRIES CAN PURCHASE WITHOUT VAT
WOOD IM...
WOOD IMPREGNANT OIL- OWATROL D-1, 1 l
Owatrol D-1 is high-quality saturating wood oil for interior and exterior tropical woods. Can be applied to both horizontal or vertical surfaces. Saturates and protects all woods - Soft and Hard. Oily and Dense. Excellent penetration - non-film forming. Replaces the natural oils lost from the wood - will not blacken the timber. Transparent - Enhances the woods natural grain. Deep penetrating, stabilises the timber - Protects against moisture ingress. Easy maintenance - no sanding or stripping. Used alone, gives a silken matt finish or overcoat with Owatrol D-2 for a high gloss finish. Where to use: Hardwoods and tropical timber- Oak, Chestnut, Teak, Mahogany, Movingui, Ipe, Bangkirai etc., Softwoods : Pine, Spruce, Larch etc., Exterior: garden furniture, patios, walkways, boat decks, topsides on boats, portals etc., Interior: flooring, paneling, stairs, doors, windows, door frames etc., Marine: Can be applied above or below the waterline. Excellent primer for conventional single pack marine coatings. Direct on prepared woods. Coverage rate for maintenance: 8 to 12 m²/l - Multicoat coverage: 1 to 4 m²/l, Application temperature: +5°C to +35°C, Drying: 24 h. - Setting up time before use: 3 days. Apply a coat of D-1 - Allow to penetrate for 15-30 minutes. Apply a second application. Allow to penetrate for 15-30 minutes. Repeat this procedure until the wood is saturated i.e. will accept no more oil. Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots. Do not allow D-1 to become touch dry or dry between coats (apply "wet on wet").
M19318001
Price: 25.70 €
WOOD IM...
WOOD IMPREGNANT OIL- OWATROL D-1, 2.5 l
Owatrol D-1 is high-quality saturating wood oil for interior and exterior tropical woods. Can be applied to both horizontal or vertical surfaces. Saturates and protects all woods - Soft and Hard. Oily and Dense. Excellent penetration - non-film forming. Replaces the natural oils lost from the wood - will not blacken the timber. Transparent - Enhances the woods natural grain. Deep penetrating, stabilises the timber - Protects against moisture ingress. Easy maintenance - no sanding or stripping. Used alone, gives a silken matt finish or overcoat with Owatrol D-2 for a high gloss finish. Where to use: Hardwoods and tropical timber- Oak, Chestnut, Teak, Mahogany, Movingui, Ipe, Bangkirai etc., Softwoods : Pine, Spruce, Larch etc., Exterior: garden furniture, patios, walkways, boat decks, topsides on boats, portals etc., Interior: flooring, paneling, stairs, doors, windows, door frames etc., Marine: Can be applied above or below the waterline. Excellent primer for conventional single pack marine coatings. Direct on prepared woods. Coverage rate for maintenance: 8 to 12 m²/l - Multicoat coverage: 1 to 4 m²/l, Application temperature: +5°C to +35°C, Drying: 24 h. - Setting up time before use: 3 days. Apply a coat of D-1 - Allow to penetrate for 15-30 minutes. Apply a second application. Allow to penetrate for 15-30 minutes. Repeat this procedure until the wood is saturated i.e. will accept no more oil. Once the timber is saturated, always brush out or wipe up any excess product that has not penetrated to avoid shiny spots. Do not allow D-1 to become touch dry or dry between coats (apply "wet on wet").
M19318002
Price: 64.00 €
OIL VAR...
OIL VARNISH- OWATROL D-2, 1 l
Owatrol D-2 oil varnish is flexible film that does not crack, peel or flake. High gloss finish. Highly transparent varnish - enhances the natural beauty of the wood and offers long term protection. No sanding between coats, Easy maintenance. Where to use: Exotic hardwoods (Teak, Ipe, Mahogany, Movingui, Bangkirai etc.) new or weathered. Exterior: garden furnitures, window and door frames, gates etc. Interior: paneling, door, window frames etc. Boats - all applications above waterline. Coverage: 15 m²/l. Application temperature: + 8° C to + 35° C. Drying: 12 h. (between each layer) - Working time: 3 days. Wood must first be treated with Owatrol D-1. Wood must be clean, dry and free of all contamination. Owatrol D-2 is very slippery and is not suitable for use in areas where it will be walked on (i.e. decks) - use Owatrol D-1 only for these areas. Do not Thin. Allow to dry minimum 3-4 days before putting back into service. Note: Clean any dripping or spots of D-2 from surface before the product dries. Once dry, spots will form and will be very hard to eliminate. It is therefore imperative to eliminate any spots right after the application.
M19318004
Price: 31.00 €
OIL VAR...
OIL VARNISH- OWATROL D-2, 2.5 l
Owatrol D-2 oil varnish is flexible film that does not crack, peel or flake. High gloss finish. Highly transparent varnish - enhances the natural beauty of the wood and offers long term protection. No sanding between coats, Easy maintenance. Where to use: Exotic hardwoods (Teak, Ipe, Mahogany, Movingui, Bangkirai etc.) new or weathered. Exterior: garden furnitures, window and door frames, gates etc. Interior: paneling, door, window frames etc. Boats - all applications above waterline. Coverage: 15 m²/l. Application temperature: + 8° C to + 35° C. Drying: 12 h. (between each layer) - Working time: 3 days. Wood must first be treated with Owatrol D-1. Wood must be clean, dry and free of all contamination. Owatrol D-2 is very slippery and is not suitable for use in areas where it will be walked on (i.e. decks) - use Owatrol D-1 only for these areas. Do not Thin. Allow to dry minimum 3-4 days before putting back into service. Note: Clean any dripping or spots of D-2 from surface before the product dries. Once dry, spots will form and will be very hard to eliminate. It is therefore imperative to eliminate any spots right after the application.
M19318005
Price: 75.00 €
VARNISH...
VARNISH- INTERNATIONAL PERFECTION PLUS, 0,75 l
International Perfection Plus - Ultimate performance, clear, two-part polyurethane high-gloss varnish. Chemical cure for the hardest finish & highest abrasion resistance. Perfection Plus superior gloss lasts four times longer than conventional one-part varnishes. Coverage: 12 m2/l. Area: above waterline. Suggested number of coats: 2-5.
W50215
Price: 59.87 €
VARNISH...
VARNISH- TEAMALAK YACHT AND SEAPLANE VARNISH, 1 l

Teamalak Yacht & Seaplane Varnish is a High-Quality, Traditional High Gloss, UV resistant Marine Varnish. It enhances all Marine woodwork both inside and out. It can also be used over existing paintwork to increase the Gloss Finish. Suitable for Yachts, Power Boats, Dinghies, Narrowboats, other Marine Structures and Seaplanes. It can be applied to suitably prepared Wood surfaces. Coverage: 14 m2/l. Drying Times: Touch Dry: 6 hours - Hard Dry 12 hours.

TE-LAK/1
Price: 15.90 €
VARNISH...
VARNISH- TEAMALAK YACHT AND SEAPLANE VARNISH, 2,5 l

Teamalak Yacht & Seaplane Varnish is a High-Quality, Traditional High Gloss, UV resistant Marine Varnish. It enhances all Marine woodwork both inside and out. It can also be used over existing paintwork to increase the Gloss Finish. Suitable for Yachts, Power Boats, Dinghies, Narrowboats, other Marine Structures and Seaplanes. It can be applied to suitably prepared Wood surfaces. Coverage: 14 m2/l. Drying Times: Touch Dry: 6 hours - Hard Dry 12 hours.

TE-LAK/2.5
Price: 36.90 €
THINNER...
THINNER- TEAMAC V607/14 (for Marine Gloss), 1 l
Teamac thinner for Metalcote and Marine Gloss.
T-TH14/1
Price: 12.90 €
THINNER...
THINNER- TEAMAC V607/16 (for Primers), 1 l
Teamac thinner for Rapidry and Metaclor coatings
T-TH16/1
Price: 15.90 €
THINNER...
THINNER- TEAMAC V607/17 (for Antifoulings), 1 l
A blend of high quality solvent for use with Teamac Antifoulings
T-TH17/1
Price: 16.90 €
THINNER...
THINNER- HEMPEL 845, 0,75 l

Thinner for Hempel`s Light Primer.

08451/0.75
Price: 16.90 €
THINNER...
THINNER- INTERNATIONAL No.3, 1 l
Thinner for International`s antifoulings.
YTA085/1
Price: 16.53 €
THINNER...
THINNER- INTERNATIONAL No.1, 1 l
Thinner for International`s one-component paints and varnishes.
YTA800/1
Price: 16.30 €
THINNER...
THINNER- PRECISION HIGH PERFORMANCE YACHT FINISH CLEANER, 0,5 l
Precision High Perfomance Cleaner for use with 2-pack finish-products.
PR-TH-HP/0.5
Price: 16.90 €
THINNER...
THINNER- PRECISION ANTIFOULING BRUSHWASH, 0,5 l
A thinner and brushwash/cleaner for use with Precision Antifouling products.
PR-TH-AF/0.5
Price: 12.90 €
CUSTOMERS WHO ORDER OUTSIDE EU COUNTRIES CAN PURCHASE WITHOUT VAT
Crewsaver Batsystem O`Brien Quick WOW Nasiol Gator Guards Cobra Marine

Join us on social media